Over the years, it has served as a grist mill, hydro-electric power plant, Ford factory and fabricating factory.

Now it is has been restored by community volunteers to create a historical museum.

The three-story frame mill as we know it was built in 1848-49 by Alfred Wilkerson, as a grist mill. The nearby dam had been constructed out of logs in 1846.

The building is of Greek Revival design, popular in Monroe County in the 1840s. "It is compact, geometric and of exquisite proportion," according to the community's Sesquicentennial Book, published in 1974.

The windows are double-hung with multiple lights. The exterior doors are divided horizontally (Dutch) and the overall design is symmetrical.

Hand-hewn beams, 10x10 inches for the main columns, support the building. The roof, floors and other connections were made with oak pegs. No longer existing are two smaller additions at the rear of the mill which were used to store flour barrels and milling tools during the building's grist mill days.

The Wilkersons sold the mill to Henry Smith of Berlin Township, in 1880 for $8,000. Two years later, Captain R.B. Davis purchased the mill. He built a new rafter dam in 1897. Timbers were floated to the site of the dam from a railroad bridge upstream which was unused and disassembled.

Capt. Davis ground buckwheat flour and feed. In 1910, he sold the mill site to the Dundee Hydraulic Power Company, which built a concrete dam.

In the 1920's Detroit Edison acquired the rights to power the Village, and the mill stood abandoned and weather-beaten until the 1930s. In 1931, Village officials voted to demolish the building in a clean-up campaign. However, Henry Ford informed them that he was the new owner.

In 1935, Mr. Ford began work on the Old Mill. He stripped the building to its original timber frame. It was rebuilt along the old lines, and timber for the mill foundation was cut from adjacent land and hand-hewed.

Henry Ford also added a limestone structure in which he installed a Leffel turbine-powered G.E. generator and a steam-powered generator as well as a foundry and steam boilers. His new factory was now part of his grand design for dotting the countryside with village industries.

The Dundee plant produced welding tips for Ford's main factories. In the Depression Era, the plant was of major importance to the local economy.

After Mr. Ford's death, the company gradually withdrew its support of the village industries and the plant was sold in 1954 to Wolverine Manufacturing Company. The company converted the plant into a paper mill to produce gasket material.

In 1970, Wolverine sold the landmark to the Village of Dundee for $1.00. The mill stood unused for the next decade until 1981 when the Old Mill Restoration Committee, a group of community volunteers, undertook the daunting task of turning the mill structure, whose first floor was covered with tar and chicken wire, into a museum.

While there are no documented deaths inside The Old Mill Museum itself, there are documented deaths at the dam, and rumored deaths on the property itself. Though even though there are not documented deaths inside, the property and area the Mill resides on is rich in history! There are also many other reasons it could be haunted.

Limestone - It's rumored that limestone can hold the energies, much like a cassette tape holds it's music. Much of The Old Mill Museum is built from limestone, which was taken from under the river, at the dam.

Power - It's said that spirits need energy, and The Old Mill Museum actually created power at one time, and in fact still has the generator!

[Moving] Water - It has been said that water, or running water tends to increase activity. The Old Mill Museum has the river right outside, the dam etc.

Antiques - It is said spirits can be attached to items, The Old Mill Museum is filled with antiques, items from many, many years ago.

There are many reasons The Old Mill Museum has activity, these are just a few.